The best way to have a firm floor is knowing how to keep rugs from slipping on tile and laminate floors. Placing a rug on your tile or laminate floor helps to add a nice pop of color in the room and the rugs also serve as a cushion or protective covering for the floor against scratches.
However, rugs tend to slide around, and this can be very dangerous for you or your family members, slipping on your rug can pose a lot of risks that you don’t want to take.
Related: Best mops for laminate floors
How To Keep Rugs From Slipping On Tile And Laminate Floors
Table of Contents
Using A Non-Slip Rug Pad
Using A non-slip rug pad is one of the easiest methods of securing your rugs and mats, keeping it in one place. Rug pads vary in thickness and can be cut to fit perfectly beneath your rug so that your rug can sit neatly and securely on top of your tile and laminate floors.
Rug pads help to keep your rug in place and also helps to reduce noise as well as absorb shock. The right rug pad thickness for you depends on the amount of traffic the area is subjected to. If the area only receives light traffic opt for a thin rubber rug pad and a thick rubber rug pad for higher traffic areas.
Read: Best Rug Pad for hardwood Floor
Using Rugs With Non-Slip Backing
If you are yet to get a new rug, or you intend to replace an old one. Try getting a rug with non-slip backing. This saves you the stress of looking for ways to stop the rug from sliding. This type of rug is common and easy to find, and tend to have grippy latex gel backing.
The latex gel adds an extra grip on tiles and laminate floors through the rubber backing, and this helps to prevent the rug from slipping on carpet.
However, the effectiveness of rubber backed rugs totally depends on the type and thickness of the tile and laminate floors it is placed on.
If your tile and laminate floors have a low pile and aren’t plushy, you can make use of just a rubber backed rug, but if you have a high pile plushy rug, a non-slip rug pad will need to be added underneath the rugs even though they are rubber-backed.
Place Furniture On It
Although this basically takes away the usefulness of the rug, if it was meant to cushion the effects of foot traffic directly on the tile and laminate floors but placing heavy pieces of furniture, like couches, coffee tables, beds, and dressers on the rug can help to hold it down and prevent it from slipping.
To not cover the entire rug completely, you should allow the furniture to overlap; this allows the rug to serve its purpose while still being held in place.
Related: How to make laminate floor less slippery
Using Caulk
If you have a rug that isn’t expensive, you can caulk it to hold it in place. This is a very simple and inexpensive method of keeping your rug in place. apply a bead of silicone caulk on the back of the rug, as well as along the edges of the rug.
Also, add a couple of caulk lines to the middle of the rug. Then using a putty knife flatten the bead head before the caulk dries so that good adhesion is created between the caulk and the rug. When the caulk gets dry, you can place the rug over your carpet.
The dried silicon caulk will help to grip the tile and laminate floors and prevent the rug from sliding. If you have an expensive or antique rug, you should not apply caulk on it, this method should only be applied on cheap rugs.
Related: How to achieve shiny laminate flooring
Sticky Tape
This is an easy fix which is also very inexpensive; apply a simple roll of double-sided tape on your rug gives it an extra grip and stops it from sliding around on your carpet. Apply the sticky tape around the perimeter of the rug, at least 2 inches from the edge; and place a few strips of tape along the center as well for an extra grip.
The sticky tape holds both the rug tile and laminate floors together to prevent slipping. However, when the sticky tape starts to collect dirt, dust, and debris, it will begin to lose its adhesive abilities. You will need to replace the sticky tape when this occurs.
Ensure that the tape you use is designed to be used on rugs or tapes and has a light adhesive.
Using tapes with strong adhesive can leave behind adhesive residue when they are removed, and this can stain your tile and laminate floors or the rug. Like with the caulking fix, it’s best to avoid tape if you have an antique or expensive tile and laminate floors or rug.
Read: How to repair swollen laminate flooring
Conclusion
Knowing how to keep a rug in place on tile and laminate floors or how to keep a rug from sliding on tile and laminate floors will help to prevent any unwanted accident from occurring with a slippery rug. Put All this fix into place untill you get the one that works best for you.
