How To Make Laminate Floors Less Slippery – 4 Effective Tips

how to make laminate floors less slippery

We all dread slipping and falling so we need to know how to make laminate floors less slippery to avoid accidents. Laminate floors can give your home that in-demand hardwood look without the price tag. However, they are also slippery.

The top super-hard coating is used in almost every brand, this is the reason behind laminate floors being slippery.

Laminate floors also tend to be slippery if you wax or polish them. Another way your laminate floor can be slippery is when the floor’s surface is dirty.

Slippery floors can be very hazardous and the most affected are the elderly people resulting in serious injuries when they fall. Pets, those in wheelchairs and busy parents are also affected as this won’t allow efficient movement and work around the home.

How To Make Laminate Floors Less Slippery

Always Keep Your Laminate Floors Clean

While cleaning your laminate floor can make it less slippery, cleaning it shouldn’t limit your floor to avoiding slip and fall accidents. You should also take care of your laminate floor for an outstanding look.

Sweep or vacuum the area thoroughly to remove any dirt, dust and debris. When vacuuming, use a soft attachment without a beater bar to avoid shallow cuts on the finish. Sweeping a laminate floor can help to minimize a pile of everyday debris, dirt and dust which make the floor slippery.

Read: Best Mop for Laminate Floors

Mix a cup of vinegar and two cups of water together. Then, mop the floor with the mixture. This solution will remove old wax residues and other cleaning products that causes the floor to be slippery.

Ensure that you squeeze out the liquid from the mop before you place it on the laminate floor to avoid excess liquid from pooling on the floor’s surface. If the floor is still wet after mopping, use a dry mop or cloth to suck-up all excess liquid. Wipe up all spills immediately.

Read: Best Steam Mop for Laminate Floors

Usage Of Anti-slip For Laminate Floors

A few laminate flooring products are so glossy and hard that even after proper cleaning the floor’s are still sticky.

Another way to make your laminate floor less slippery is to use an anti-slip. Anti-slip wood floor coatings are commonly used for both outdoor and indoor use. Anti-slip products call for a double coat, spread thinly.

You can use either an anti-slip spray or anti-slip floor finish. Try to test either of the two on a small part of your floor before using on the entire floor surface.

This will make you know if it sticks well and changes the appearance of the floor in a way you will dislike it.

If you use the spray, you can only apply it on the most sticky areas. Ensure that each coat dry up to 10 hours. Also, ensure you work in a well-ventilated area when applying the anti-slip to your floor.

Related: How to keep rugs from slipping on laminate floors

Use Rugs, Runners and Doormats

Place rugs and runners on high traffic areas and make sure you place non-skid pad under each rug and runners to minimize instances of slipping. Also, consider putting doormats at all entrances for your family and guests to wipe their feet and avoid bringing dirt inside.

Put On Ideal Footwear

Instead of adopting no-shoes policy, choose sensible footwear to use around the home. Do not use hard-heeled shoes or socks but use rubber-soled sport trainers or house slippers. Correct footwear is an easy solution worth mentioning.

Related: How to stop yoga mat from sliding on floor

Conclusion

I believe you now know how to make laminate floor less slippery from the tips outlined above. Keeping your laminate floor clean and dry will stop your floors from becoming slippery.

Avoid products containing oil as those will not decrease the slickness of the floor. Adding carpet runners and rugs to high traffic areas will reduce the risk of slipping. Choosing rubber soled footwear to use on your laminate floors will not cause you to slip or fall.

What method have you implemented in making your laminate floor less slippery? Don’t keep us in the loop, do let us know in the comment.

Scroll to Top