How to Solve Shark Vacuum Overheating (4 Easy Steps)

shark vacuum overheating

Having a clean home is essential to our health. Cleaning is the most important aspect of our daily lives. Dust and dirt particles accumulate over time if our homes are not properly cleaned. To get rid of this, you need a vacuum cleaner.

This is why most people invest in high-quality vacuum cleaners like shark vacuum. They are fantastic, powerful, and have some unique features.

However, just like every other machine, it can develop problems like overheating. Shark vacuum overheating makes it difficult to make use of your vacuum. Whenever you have this challenge, here’s how to solve shark vacuum overheating.

Read: Shark UV540 Vacuum Review

How to Solve Shark Vacuum Overheating

After continuous use, it’s natural for your vacuum to get a little hotter. However, overheating is different. If you suspect that your shark vacuum is overheating, here are some solutions you can consider.

1.    Empty The Dust Container

Emptying the dust cup is a good way to start. This will clear the pathway and allow for proper airflow and improved suction power. Generally, this is routine maintenance. By emptying the container regularly, you can extend the life of the device, ensure top-notch performance, and provide a positive user experience. If this doesn’t work out, you can try the other methods.

2.    Clean Your Filter

To do this, you will need to remove the dirt container and metal grate from your vacuum. To be on the safe side, ensure that the machine is not connected to a power outlet; this will enable you to access the filter safely.

For a cordless shark, remove the wand and unlock the compartment at the front of the machine. The filter is located there. For shark vacuum with cord, the filter is located behind the dust cup.

After that, run the filter under cold water and squeeze it to clean it. Repeat this step until the water coming out is clear. Lastly, air dry the filter for a minimum of 24 hours before reinstalling it.

Keep in mind that not all vacuum filters can be washed. Some are non-cleanable filters. Therefore it is advised you check your manual before taking this step.

Read: How to clean shark vacuum filter

3.    Clean Your Hose or Wand

This is a pretty straightforward procedure. To carry out this step, you’ll need a thin metal wire or stick. Basically, you just need to insert the wire into the hose or wand to push out any dirt stuck in between. You are essentially clearing the pathway to prevent your shark vacuum from overheating.

Read: How to clean vacuum hose

4.    Replace or Repair Any Electrical Damage

This is an important step, provided you already know where the damage is with your vacuum. Or thoroughly inspect the cord or plug for any sign of damage or breakage. Avoid using your vacuum if you discover a tear in your cord until it is repaired or replaced. You can get a professional to do the repair for you or do it yourself.

Causes of  Shark Vacuum Overheating

Before you can find a solution to your challenge, you need to figure out why your shark vacuum is overheating in the first case. Most times, there are four common issues that result in the overheating of your shark vacuum. Let’s dive in fully into it.

Full Dirt cup

First and foremost, you need to check out your dirt cup. If the dirt in the cup is above its maximum capacity, chances are this is why your vacuum is overheating.

Basically, the space in the container regulates the airflow, which regulates the vacuum’s suction power. When this airflow is restricted, the vacuum losses its suction ability causing it to overheats.

You can identify if this is the source of your problem by using the vacuum on a hardwood floor. If the vacuum leaves dirt behind, this could be the source of the overheating.

Clogs In The Filter

The role of a filter in a vacuum cleaner is very important. They collect most of the dirt, like dust, pet hair, human hair, debris, and others. When the filters are in proper working condition, they regulate optimal airflow. This enables your vacuum to perform as it should.

However, sometimes the filter can end up with dirt particle build-up after prolonged use. This build-up will prevent airflow in the vacuum resulting in overheating. If you know your filter hasn’t been cleaned or replaced, chances are this is the source of your issue.

Read: How to recycle a vacuum cleaner

Hose, Wand, or Other Attachments Clogs

Another possible source of shark vacuum overheating is the hose, wand, or other attachment. That is once you’ve determined that the filter and dirt cup are not the problem.

This is a common occurrence, particularly for those that vacuum pet hair. This hair can get stuck in the hose, thereby prevent the dirt particle from going into the cup. To determine if this is the cause is pretty easy.

All you have to do is detach the hose and place your palm at the inlet. You should be able to feel if the suction power is regular or not. Once you do that, you’ll be able to determine if the hose is clogged or not.

Read: How to clean vacuum brush

Electrical Challenges

Electrical challenge is the last issue that can cause your shark vacuum to overheat. It is also the most important, and chances are this is the source of your problem if others turn out to be ok. This could either be the vacuum’s power plug, cord, or internal components. Electrical challenges are dangerous for you and the vacuum, so they should be fixed immediately.

Read: How long do vacuums last

Conclusion

Shark vacuum overheating shouldn’t cause any alarm. We’ve described and simplified all the challenges that can crop up with a vacuum cleaner.

These are the most common problem most people have with shark vacuum. The step-by-step details will help you handle the problem easily without any cause for panic. Most importantly, ensure you handle and properly take care of your vacuum. Shark is known for being the best, but nothing is perfect.

Scroll to Top