How to Prevent Footprints on Hardwood Floors (8 Simple Steps)

How to prevent footprints on hardwood floors

Walking inside your house with dirty feet can leave dirty foot marks on your hardwood. An oily coat on the surface is one of the causes. It is even more apparent in high traffic areas and can be unpleasant to the eye.

To prevent footprints on the hardwood floor, you would need to clean the hardwood floor carefully to eliminate grime.

Vacuum the affected area, and apply the mixed-up soapy formation to wipe off footprints on the floor. Finally, place doormats at the door entrance. These steps would also prevent footprints on hardwood floors.

A detailed process on how to prevent footprints on hardwood floors is discussed below.

Read: How to clean grease off hardwood floor

How to Prevent Footprints on Hardwood Floors

Walking indoors with dirty and greasy feet might leave dirty footprints on your hardwood floors, which is very unpleasant to the sight. However, there are well-mapped-out formats to prevent footprints on Hardwood floors.

Let us go through this process below:

Step 1:

Get the equipment you need to aid the process: broom, mop, stirring utensil, vacuum, rubber-free floor mats, bleach-free dishwashing liquid, microfiber towels. All these tools are needed.

Step 2:

Make sure to clean the hardwood carefully to eliminate footprints and filth. Sweep the room with a broom. Doing this regularly would help eliminate the possibility of footprints on the hardwood floor.

Step 3:

Make sure to vacuum the hole between varying hardwood planks using a vacuum. Make sure the vacuum does not have a rotating beater bar. Beater bars tend to grate hardwood floors.

Read: How to clean dirt in groove of hardwood floor

Step 4:

Put in two pinches of bleach-free dishwashing liquid in a bucket. One gallon of water should be the required content. Thoroughly stir the soapy formation.

Step 5:

Place a mop in the soapy formation. Make sure to squeeze out the excess solution from the mop.

Step 6:

Drift the not-too-wet mop slowly over every existing footprint on the hardwood floor. Rinse the water frequently in the second bucket to avoid the soapy formula from getting contaminated with dirt.

 Make sure to squeeze out the mob after rinsing it.

Step 7:

Lower the moist area of the hardwood floor immediately with a microfiber towel to remove any soap film. Don’t mistake rinsing the hardwood; too much water is deteriorating to the hardwood.

Step 8:

Place floor mats at every entrance or strategically to avoid the hardwood from revealing footprints. Ensure to remove your shoe and wipe your feet on the floor mat each time you arrive home.

Read: How to keep footprint off tile floor

How to remove footprints on hardwood floors: Final Thoughts

Finding footprints on your hardwood floor results from oily coatings on the floor. It would be best if you stopped using hardwood floor cleaners and waxes. They continuously deteriorate the issue and make footprints and paw marks, more evident.

Scroll to Top