Those metal scratches on your porcelain tile can come in different ways. It is essential to know how I remove it, whatever form it comes in.
There are various ways on how to remove metal scratches from porcelain tile. Metal scratches can occur when a metal object drops or is dragged across a porcelain tile. It can also appear when water containing leached metals drops on the porcelain tile surface. These scratches have an unpleasant appearance and can make your floor look ugly.
To remove metal scratches from porcelain tile, you will need to scrub the flooring thoroughly using a mixture of baking soda and water, apply the paste to the metal scratch or
Related: How to make porcelain tile shine
Materials needed to remove metal scratches from porcelain tile
Table of Contents
Before we delve into the steps, let’s look at the materials you will need to remove metal scratches from your porcelain tile.
- Water
- Baking soda
- Small container
- Soft-bristled brush
- Medium-bristled brush
- Porcelain repair product.
- Whitening non-gel toothpaste
- Melamine foam
- Dry rag
How to Remove Metal Scratches from Porcelain Tile
Below outlined are the easy steps to follow to go about this:
Step 1: Mix baking soda and water
In a small container, pour a good amount of baking soda and add a few drops of water. Mix until the baking soda forms a paste.
Step 2: Apply the paste to the metal scratches
Evenly apply the paste to the affected area and gently scrub it across the surface using a soft-bristled brush or a scrubbing foam.
If the scratch is deep, use a medium bristled brush to scrub the surface.
Step 3: Rinse with clean water
Pour water on the affected area to rinse the baking soda and metal particles away from the tile.
If you still notice traces of metal scratches on the porcelain tile, use a damp melamine resin foam eraser to rub the surface. Rinse again.
You can also apply a whitening non-gel toothpaste or a rust removal product and leave it to settle for about 6 minutes. Scrub and rinse again with clean water.
Step 5: Dry the tile
Use a dry rag to remove excess water from the porcelain tile. Then allow the tile to dry for a minimum of 10 hours.
If you still notice the metal scratches, you may apply a porcelain repair product to fix them.
Read: 10 best cleaners for porcelain tile
Conclusion
The amount of cleaning needed to remove metal scratches from porcelain tile largely depends on the extent of the damage.
However, most scratches go off immediately after scrubbing with some of the materials listed in this article.
Liquids with acid content such as white vinegar or lemon juice can also remove metal scratches. But this may not be the best alternative because acids make porcelain tiles lose their gloss.
This article was written to help you understand every detail about how to remove metal scratches from porcelain tile and to make an informed decision when faced with the choice.
We hope you found it helpful; if you did, kindly share it across your entire social media pages.