Brick flooring is adaptable, sturdy, and can be laid out in various patterns and styles to create a beautiful and functional space.
The bright side is that the lovely, durable floor you’ve installed in your home will last you for many years. The flip side of the coin is the maintenance that brick necessitates. Brick is porous and absorbs dirt and grime fast, necessitating regular cleaning, sealing, and polishing.
When it comes to ways on how to remove wax from brick floor, scrapping off the wax, then heating the rest while placing a paper towel or newspaper above the affected area is your best bet.
Candles are lovely ornaments, but they can make a terrible mess if they spill or melt. Because bricks are porous, the wax can penetrate past the surface and appear to be permanently attached.
It takes a little more effort to remove the wax from this brick, but it is still doable. The entire stain and any rings or discolored areas should be removed by drawing the wax out of the pores. The essence of this article is to answer your questions on how to remove wax from the brick floor.
What You Will Need
Table of Contents
- A dull knife or a spoon
- Heat gun made of iron (optional)
- Soft towels or newspaper
- Alcohol rubbing
How to Remove Wax From Brick Floor
- Begin by scraping as much wax as possible from the surface with a dull knife or a spoon.
- When all of the wax has been taken from the surface, the remaining wax must be melted before being removed. To do so, gradually heat and melt the remaining wax with a heat gun or iron (without steam).
- Place a soft cloth or newspaper on top of the melted area and gently press. The wax should be transferred to a newspaper or cloth and removed from the brick. Place the iron on top of the paper/cloth to generate extra heat and maintain the wax melted during the transfer.
- Repeat as needed, using clean newspaper or towels to remove all of the wax.
- If you can’t reach the wax with the newspaper or towel, you might be able to heat it sufficiently with the heat gun to evaporate it. A little dab with a soft cloth will assist remove any lingering wax that has worked its way to the surface.
- If the wax is still present, try heating it until it is soft and then wiping it away with a delicate cloth soaked in rubbing alcohol. Gently massage until all of the wax has been gone.
Other Methods to Remove Wax From Brick Floor
There is also another method to consider when trying to solve the problem of how to remove wax from the brick floor.
What You Will Need
- Paint chisel or ice butter knife
- Water and soap
The processes of removing wax from brick floor include;
- If the wax is still liquid when you see it, dab it with an absorbent cloth or paper towel. Do not rub the brick with the cloth! The wax will smear and spread if you rub it. To remove some of the wax, dab it with an up-and-down motion. The rest will very certainly need to be removed later.
- Allow the wax to cool. Warm wax is more difficult to remove than cold wax. To make the solidified wax as cold and solid as possible, place a piece of ice on it.
- Use an old butter knife or, better yet, a paint chisel to scrape away the hardened wax.
- Any wax that won’t come off can be removed with a solvent or wax candle remover. With a soft cloth, clean up the mess. Using a fabric dipped in soapy water, clean the brick. Only use a cloth dipped in water to rinse.
- Spots dyed with candle wax should be rubbed with a bit of solvent or bleach. Using a cloth dipped in soapy water, clean the brick. Only use a cloth dipped in water to rinse.
How to Clean Brick Floor
When cleaning this type of floor, keep in mind that it comprises two parts: the brick itself and the grouting lines that connect each brick.
Cleaning the bricks may be easier than cleaning the thinner grout lines, which collect and ingrain debris and filth. Cleaning brick floors ineffectively can cause the grouting lines to be damaged and deteriorate over time.
While brick floors are tough and virtually indestructible, sharp objects dragged across them, something heavy or heavy falling on them, or chemicals burning the surface treatment can all cause damage.
Use a soft-bristled brush or sweeping machine to remove dust, grit, and other particles from your bricks and grouting.
If you hear scraping, you should take it more accessible. Reduce the pressure you use and let the broom or machine glide across the floor.
If something gets trapped in the bristles of your broom, brick floors can scrape and scratch. If you hear any abrasive noises, inspect your cleaning equipment.
When vacuuming, use a soft-bristled attachment and stay away from beater bars, which can cause your bricks to chip and shatter. While a brick floor is durable, it is susceptible to pitting and cracking when subjected to extreme vibration. Vibrations caused by a heavy-duty vehicle
As an example:
- Vacuum or sweep in one direction. This entails sweeping, lifting, returning, and sweeping. Sweeping back and forth creates a sandpaper effect, which scrapes the sealing layer away.
- Use gentle gliding motions. The broom, sweeping equipment, or vacuum cleaner should not be dragged or pushed.
- Before going on to a new area, work from one end to the other of a row of bricks.
- When you’re done, clean up from the other side of the floor to remove any diagonal grouting lines that you may have missed.
Cleaning Techniques for Brick Floors Every Week
While cleaning your floors with a broom or vacuum regularly will keep them cleaner for longer, you’ll need to wash them once a week to keep the shine and promote excellent hygiene.
Using a high-quality mop and the proper cleaning solution, you can create a professional finish in no time.
Every process you need to follow to remove wax from the brick floor as outlined in this article; take your time and practice the steps above to achieve your goals.
The article explains in detail how to remove wax from brick floor and the steps to take to achieve this to give you your desired result.
We hope you found it helpful; if you did, kindly share it across your entire social media pages.