The sight of tire marks on the concrete floor of our driveway or garage is anything but pleasant to the eye. You might have planned to get rid of these troublesome tire marks but must have been too busy or procrastinating.
This post will show you how to get rid of tire marks on concrete. Firstly, get the tools and materials ready, clear the concrete floor off any debris or dirt, then pour degreasers on the tire marks and give it time to sit properly. Finally, scrub the area with a stiff straw brush.
Read on as we discuss more of this in detail.
Related: How to remove black mastic from concrete floors
How to Get Rid of Tire Marks on Concrete
Table of Contents
The sight of tire marks on the concrete floor of your garage or driveway can be disturbing. Here is a step-by-step guide on how to get rid of tire marks on the concrete floor.
1. Get the Tools and Materials Ready
You would have to get the tools you need to get started readily. They include; a power washer or mop, degreaser, stiff straw scrub brush, and rubber gloves.
2. Get the Concrete Floor of Any Debris and Dirt
Make sure you get rid of any dirt or debris from your concrete floor, especially in settings like the driveway or garage. Also, ensure to cover or get rid of anything obstructing the way or getting wet in the process. Equally, protect flowers and plants, if any, in the surroundings to avoid getting damaged.
3. Pour degreasers on the Tire Marks and Allow it to Settle
Use concrete degreasers on the tire mark. Pour the degreasers on the tire marks and allow them to settle for about 30 minutes or so. Ensure you don’t let it dry. The main point is not to allow the degreaser to dry, so keep adding more until it is drenched and wet.
During warmer periods, try performing your work during the cooler part of the day. This is to avoid the degreaser drying up at a fast rate.
Read: How to clean oil off garage floor
4. Scrub the Area with a Stiff Straw Brush
Scrubbing the tire marks with a stiff straw brush goes a long way in getting rid of the mark. Some people argue that you only need to apply the degreaser on the tire marks, and everything is set. But it is not so; the straw brush gives the job a more thorough outlook.
Scrub the area using your stiff straw brush, leave it for 30 minutes, and then vigorously scrub the concrete floor. You can also use a floor scrubber or a floor buffing machine.
5. Apply More Degreaser and Continue Scrubbing
Apply some more degreaser on the area after a few minutes and scrub vigorously on the concrete floor. You don’t need to do much scrubbing at this point, but it is pertinent to apply more degreaser and scrub actively.
6. Wash it Off with a Power Washer
You can use a power washer or a mop to get rid of the degreaser. Mopping is even the best when indoors.
Read: How to clean stained concrete floors
Conclusion
Getting rid of tire marks from our concrete floor can be a bit tricky. It is even more so if the marks have been stuck to the concrete floor for a while now.
Not to worry, we gave a step-by-step guide on how to get rid of tire marks on the concrete floor of our driveway or garage.