Laminate floors despite being a less costly and user-friendly flooring option, still have some of its weaknesses that can’t be overlooked, that’s its surface peeling off easily and it really isn’t good for business, as it has its underlying effect.
In this post, we would be showing you an outline on how to fix peeling laminate floors, Firstly, taking action at the beginning stage of the peeling can help save stress.
Using superglue or epoxy glue and adhesives, or in cases where it’s a bit complicated, a heat gun or hairdryer can come into play.
For a much more complicated case, you can sand it off with sandpaper, and then paint for more effect.
Read on as we show you ways to fix peeling laminate floors.
How to Fix Peeling Laminate Floors
Table of Contents
As mentioned above, there are ways to fix peeling laminate floors and bring them back to good shape; almost as good as it was when newly bought. There are really steps to its actualization and to ensure that’s it’s effectively fixed.
1. Using a Super Glue
Superglue or epoxy gum would really be useful at the initial stage of the peeling.
If you notice the corner of your floor is beginning to peel off, apply adhesive to the particle peeling side, and ensure that adhesive isn’t used too much.
You can squeeze the adhesive on a matchstick or toothpick and slide it under the peeling laminate floor, for more effective results.
2. Using a Heat Gun
If your laminate floor is peeling around the edges, the best equipment would be a heat gun and to be on the safe side, use a utility glove to avoid burns.
Aim a heat gun or dryer at the bubbling area and heat it up to ensure it’s dried, and then place a rug to protect the area. Finally, place heavy objects to hold the area in place as it glues back and the temperature lowers.
3. Sanding and Painting
In a much complicated case where trying to glue the peeling laminate floor was not successful and the bubbling doesn’t recede. It is advisable to remove the peeling laminate and sand off the floor area that’s yet to peel off with 220-grit sandpaper. You can paint the bare surface or lay a new one to make it look nice.
How to Maintain Laminate Floorings
Though maintaining your laminate floors can be a bit tricky, here are steps to ensure adequate maintenance and avoid them from peeling or bubbling.
1. Cleaning Laminate Floors Regularly
It’s advisable to sweep your laminate floor regularly to avoid the accumulation of dirt and dust particles.
You can clean or sweep your flooring with a soft broom. For more thorough cleaning, you can use a damp mop, warm water, and mild detergents.
2. Don’t Drag or Slide Furniture
It is not advisable to drag or slide furniture across the room where there is a laminate floor to avoid peeling of the surface.
3. Use Floor Protectors
Use pads and castor under table legs or chairs to prevent dents, scratches or peeling.
4. Use Doormats or Rugs
Use doormats at the entrance, this would help prevent the accumulation of debris and tracking of dirt to your home. It would also serve as a reminder for guests to take off their shoes at the entrance.
Related: Will a rug help a squeaky floor?
5. Avoid the Use of Harsh Cleaning Products
Avoid using harsh or scouring detergents on your laminate floors as it would weaken the surface of the floor and this may lead to its peeling off.
6. Clean Water Spillage Immediately
Try as much as possible to clean of liquid when it spills. If left to permeate the insides of the laminate floor, it might result in peeling and bubbling.
Related: How to repair swollen laminate floor
Conclusion
Though fixing a peeling laminate floor requires precision and sensitivity, it still isn’t something impossible to achieve if a step by step approach on how to fix peeling laminate floors is being carefully undertaken.
By carefully adhering to the penned down approach above, you can place your laminate flooring in an optimum state.
