Everyone wants to beautify their home floor, be it with carpet or tiles or rugs. While using a carpet has its advantage, you have to clean it regularly.
However, some people are unaware of How to use hoover carpet cleaner. All you have to do is fill the tank with water, turn on the cleaner then wash and rinse. Ensure to clear the area by removing all the furniture and move the furniture back in once the area is dry.
Now giving your carpet thorough cleaning has become an easy process using a hoover carpet cleaner; you don’t need to hire the services of professionals anymore.
How to use Hoover Carpet Cleaner
Table of Contents
Clear The Area
First and foremost, you have to clear the area you plan to clean. You must remove all the furniture from the room as this will allow you to perform the cleaning process more efficiently.
You can move the furniture to one side of the room if it’s too difficult to move out of the room.
Preparing the cleaning area before beginning the cleaning process is very important when having your carpet cleaned with the hoover carpet cleaner.
If the furniture cannot be taken out of the room, you will need to cover the wooden leg of your furniture with plastic wrap. This prevents water from coming in contact with it.
Find Out: Should you dust or vacuum first?
Read Instructional Manual
Now that the furniture is out of the room, you can begin your cleaning. Start by reading the manual guide to get the idea of how to use a hoover carpet cleaner.
Fill The Water Tank
Every hoover carpet cleaner is equipped with a clean water tank and dirty water tank. By pressing the lock on the handle, you can remove the clean water tank. To fill up the water tank, remove the top of the water compartment.
Fill The Solution Compartment
You need to measure out the cleaning solution that goes into the cap in the water tank. However, this depends on your hoover brand. To determine how much cleaning solution to use, refer to the package instructions.
Turn On Hoover Cleaner
Sometimes you might have to exercise patient while it heats up before using it, or you might be able to use it right away. Choose the cleaner’s setting that best matches the surface you’re cleaning.
You’ll almost certainly have to decide on the length of the carpet you’ll be cleaning. You can pull the trigger and start working your way across your floor once you’ve found the right setting.
For good cleaning, go back and forth over the same area several times. If you notice any stubborn stain, keep moving back and forth until the stain is no more.
Ensure you overlap your back and forth movement to reach all the areas you are cleaning.
After you’ve used a cleaning solution on the whole floor, you have to rinse it. This way, you don’t leave any detergent left on the carpet. Pour out any remaining solution in the water tank and fill it up with clean water. Retrace your steps across the carpet, going back and forth over each section.
When you have rinsed the whole area with your vacuum, go over them again without pushing the trigger. Although no more water will be released, however, it will activate the suction. Remove all the water you possibly can from the carpet.
Find Out: Does water stain carpets?
Allow It To Dry
Allow the whole area to be thoroughly dried before moving furniture back in. Although air drying might take some time, you can decide to speed up the process using a fan to circulate the air.
As soon as the carpet is completely dried, you can return the furniture to its previous position or rearrange it and walk on the carpet again.
A carpeted floor is undoubtedly appealing to visitors. Still, stains, grime, and spills of any kind can detract from the beauty of the carpet.
As a result, it becomes necessary to thoroughly clean the carpet, which is made much easier with the help of hoover carpet cleaner.
With the guidelines closely followed, you should know how to use hoover carpet cleaner to clean your carpet with ease and give your carpet that alluring feeling.