A discolored and stained grout can have a disastrous effect on your beautiful tiles. At the same time, scrubbing moldy, dirty, or discolored grout lines can be an enormous task you might not exactly be cut out for.
If you are in the category of people that find scrubbing grout lines a bit tasking, then this post covers the easiest way to clean grout without scrubbing. A Peroxide and Baking Soda mixture is the easiest way to clean grout without scrubbing.
There are also other methods of cleaning grout lines without scrubbing, which will be discussed below:
Read: Does steam cleaning damage grout?
Easiest Way to Clean Grout Without Scrubbing
Table of Contents
If you want to know how to clean floor grout without scrubbing, then read on:
Method 1: Peroxide and Baking Soda Mixture
Both peroxide and baking soda are popularly known cleaning agents. When these cleaning agents are combined, they make quite a powerful cleaning solution that polishes away stains and brightens the grout in one step.
To make this mixture, combine dish soap, baking soda and peroxide in a bowl. Mix thoroughly and spread onto the stained grout.
Allow the mixture to sit at least ten minutes, then wipe with a damp cloth or mop. Alternatively, you can use a hard bristle brush to scrub the mixture on the grout lines.
Method 2: Vinegar and Baking Soda Mixture
Like the first method discussed above, both vinegar and baking soda are powerful cleaning agents that can polish and lift away stains from grout lines. If you’re familiar with most household cleaning agents, you will realize that vinegar is well known for its incredible versatility.
To make this solution, combine warm water, baking soda, lemon juice, and white vinegar in a bowl, then pour into a spray bottle and spray all over your grout lines.
Allow the mixture to sit for at least an hour, then scrub gently with a brush. Right before your eyes, most dirt and grime will lift away.
Read: Can vinegar ruin your grout?
Method 3: Use Clorox Bleach
If you are not keen on using household items to clean the grout lines, you can go to a store-bought grout cleaner. From all indications, Clorox bleach seems to be the best cleaner for grout in terms of raw power alone.
You can either choose to dilute the bleach or not. For more effect, pour the undiluted bleach all over the tiles. Allow the bleach to sit for at most 5 minutes and scrub off gently.
It’s very important you don’t leave the bleach on the tile too long. Bleach is corrosive and can cause permanent damage to your grout the longer you leave it.
Also, make sure that area is properly ventilated when using bleach to clean grout lines. If possible, turn on fans before using bleach of any kind. Make sure to wear protective items of clothing like rubber gloves when using breach.
Due to how harsh bleaches are on tiles and grout lines, we recommend you use it minimally and only when you’re dealing with strong stained and discolored tiles.
Read: How to paint grout lines
Method 4: Use Alkaline Cleaners
Alkaline cleaners are specially made for cleaning the grout of mold and mildew. The procedure involved in using Clorox Bleach should also be adopted for alkaline cleaners. Always adopt safety measures when using chemical cleaning products.
How to Maintain a Clean Grout
While all these methods discussed here are quite effective in cleaning grouts without scrubbing, sometimes the best and easiest way to clean dirty grouts is to prevent the grout from getting dirty in the first place.
With proper maintenance, you probably do won’t even need the methods discussed here on cleaning dirty grouts because there is nothing to clean. Below are some of the best tips to maintain your grout
1. Seal your Grout Once Every Year
As we all know, sealing is a good way to protect floorings. But grout lines need such protection too. Sealed grout will hardly get discolored since the sealant will create a protective barrier against the grout and dirt.
There is a tendency for the sealant to wear off after much use. Thus you will need to renew the sealant at least once a year.
2. Vacuum your Floor Regularly
Leaving dirt on the floor is a recipe for discolored grout. There is a need for you to vacuum your floor every day. Vacuuming regularly not only makes mopping easier but also ensures that you won’t be transferring dirt but rather giving your floor a cleaner touch.
3. Mop your Floor Regularly
A mild detergent with lots of water should be used to mop your floor. Dirt on your floor will easily lead to discolored grout, and you surely don’t want that. Use mild detergent as harsh detergent will leave you with a sticky floor that gathers dirt quickly.
4. Know Your Flooring
Sound absurd, right? But the understanding your type of flooring will go a long way to determine how to clean them.
Read: How long does it take grout to dry
Conclusion
We hope this post provided all the relevant information on the easiest way to clean grout without scrubbing. We understand that you don’t want to spend hours on your knee scrubbing grout lines.
Remember, prevention is better than cure, so it makes more sense for you to take active steps in maintaining your grout and tiles.