Why do you need to visit the salon to color your hair when you can easily do it at home? A simple tutorial on YouTube will guide you through the process. Most hair dye kits are self-directory and can be sued without any accidents.
What happens when a chunk of hair dye lands on your vinyl floor? That is why this post is interested in how to get hair dye off vinyl flooring. To get hair dye off vinyl floors, first, blot the stain with a damp absorbent cloth, then clean with a baking soda and water paste.
There are also DIY techniques that can be used to get dyes off vinyl floorings, which will be explored in this post. Read on.
Read: How to get hair dye off laminate flooring
How to Get Hair Dye Off Vinyl Flooring
Table of Contents
Once hair dye drops your vinyl floors, blot it immediately with a damp absorbent cloth or sponge. How fast you act will determine the success of your project.
Leaving the dye to dry off on the floor will make the whole process a bit harder. Follow the steps below to hair dye off vinyl flooring:
Step 1: Blot the Stain with a Damp Absorbent Cloth
Soak an absorbent cloth or sponge in water and use it to wipe off the dye. Try to eliminate as much dye as possible while making sure not to spread the dye all over the floor.
Please don’t rush to clean off the dye with cleaning agents without blotting it first with a damp absorbent cloth. Doing this might damage your vinyl floors.
Read: How to protect vinyl flooring from legs
Step 2: Make a Baking Soda and Water Mixture
Everyone knows that baking soda is a strong cleaning agent with potent stain removing qualities. To make the solution, mix a tablespoon with two cups of hot water.
The solution should have a paste-like consistency. You can add a liquid soap for added fragrance
Step 3. Apply the Mixture to the stain
To err on the side of safety, we recommend you try out the baking soda and water mixture in a tiny, inconspicuous area of your vinyl floors.
Once you’re sure that the solution doesn’t have any unpleasant effect on the flooring, then you can move on to applying it over the stained area.
Apply the mixture to the stain with the cloth or sponge in a circular motion. Give the mixture some time until it hardens on the floor.
Step 4: Wipe off the Paste
Once the paste hardens, use another absorbent cloth to wipe off the paste. Move the absorbent cloth in a circular motion until the paste is completely gone.
If there is still some stain remaining on the floor, you might have to reapply the cleaning solution and repeat the process all over again.
Read: How to whiten vinyl floors
Other Methods of Removing Hair Dye Off Vinyl Floors
If you don’t have baking soda around the house, there are alternative ways of getting hair dye off vinyl floors with some DIY techniques.
Method 1: Use Vinegar and Commercial Stain Remover
First, start by blotting the stain with a soft cloth or Q-tip damped in rubbing alcohol, then blot the stain with vinegar diluted in water, then allow it to dry.
You can then Rub Mr. Clean Magic Eraser, after which you use a clean cloth or Q-tip to dipped in mineral spirits or turpentine on the stain. Rinse thoroughly and allow the floor to dry.
If there is still an outline of stain on your vinyl floor, make baking soda and water mixture (should have a paste-like consistency) and lightly scrub the stain with it.
After this, blot the stain with nail polish containing acetone and then apply wax to the area after the stain is removed to restore the finish.
Method 2: Baking Soda and Peroxide Mixture
A baking soda and peroxide mixture can effectively take care of stubborn stains since both ingredients are strong cleaning agents. To make the solution, mix a tablespoon of baking soda with few drops of peroxide until you get a paste-like consistency.
Rub the paste on the stain until it starts to bubble and the stain starts to lighten. Then, wipe off with a damp cloth or sponge.
Method 3: OxiClean and Water Mixture
If you’re opting for commercial stain removers, then OxiClean is probably your surest bet. This stain remover is vinyl floor friendly and, at the same time, will get rid of hair dye stains in no time.
A tablespoon of OxiClean should be diluted in a tablespoon of water. Mix this cleaning agent with water until it looks milky before using a sponge to rub the stain in a circular motion. Please leave it to sit for some time, then wipe with a damp absorbent cloth.
Read: Best way to clean vinyl floor
Conclusion
If you allow the hair dye to dry on your vinyl floor, the chances are that none of these homemade remedies discussed here will remove the hair dye. Your only option might be to try out a commercial stain removers.
We hope this post answers all you need to know on how to get hair dye off vinyl flooring. Good luck.